Print
this page
Email this topic
Feedback
View PDF
Download EPUBdisable vpls health-check vccv
Note
This command has been replaced with the following command: disable l2vpn [vpls [vpls_name | all] | vpws [vpws_name | all]] health-check vccv .
This command is still supported for backward compatibility, but it will be removed from a future release, so we recommend that you start using the new command.
Description
Disables the VCCV health check feature on one or all VPLS instances on the local node.
Syntax Description
| vpls_name | Identifies the VPLS for which health check is to be disabled. |
| all | Specifies that health check is to be disabled on all VPLS instances on the local node. |
Default
Health check is disabled.
Usage Guidelines
None.
Example
The following command disables the health check feature on the VPLS instance myvpls:
disable vpls myvpls health-check vccv
History
This command was first available in ExtremeXOS 12.1.
Platform Availability
This command is available only on the platforms that support MPLS as described in the Feature License Requirements document.