Print
this page
Email this topic
Feedback
View PDF
Download EPUBdisable vpls
Note
This command has been replaced with the following command: disable l2vpn [vpls [vpls_name | all] | vpws [vpws_name | all]].
This command is still supported for backward compatibility, but it will be removed from a future release, so we recommend that you start using the new command.
Description
Disables the VPLS instance specified by vpls_name.
Syntax Description
| vpls_name | Identifies the VPLS within the switch (character string) |
| all | Specifies all VPLS. |
Default
All newly created VPLS instances are enabled.
Usage Guidelines
This command disables the VPLS instance specified by vpls_name. When a VPLS instance is disabled, all sessions to its configured peers are terminated. Any locally attached service VLAN/VMAN is immediately isolated from other devices residing in the VPN. If this is an H-VPLS core node, then all spoke nodes connected to this peer are isolated unless redundant core access is configured.
Example
The following example disables the VPLS named "myvpls":
disable vpls myvpls
History
This command was first available in ExtremeXOS 11.6.
Platform Availability
This command is available only on the platforms that support MPLS as described in the Feature License Requirements document.