Print
this page
Email this topic
Feedback
View PDF
Download EPUBdisable virtual-router
disable virtual-router vrf-name
Description
Disables a VRF.
Note
This command is only applicable for VRFs.Syntax Description
| vrf-name | Specifies the name of the VRF. |
Default
Enabled.
Usage Guidelines
When you disable a VRF, the software does the following:
- Disables Layer 3 protocols.
- Marks static routes as inactive and removes them from the hardware forwarding tables.
- Flushes the IP ARP and IPv6 neighbor-discovery caches.
Example
The following example disables VRF "vrf1":
disable virtual-router vrf1
History
This command was first available in ExtremeXOS 12.5.
Platform Availability
This command is available on all platforms.