Print
this page
Email this topic
Feedback
View PDF
Download EPUBshow mvrp
show mvrp
Description
This command is used to show the mvrp settings as follows. If the MVRP enabled port is a load shared port, a suffix ?g‘ is displayed.
Syntax Description
| mvrp | Multiple VLAN Registration Protocol. |
Default
N/A.
Usage Guidelines
Use this command to show the MVRP settings.
Example
# show mvrp
MVRP enabled : Enabled
MVRP dynamic VLAN creation : Enabled
MVRP VLAN registration : Forbidden
MVRP default STP domain : s0
MVRP enabled ports : 9 *11 *13
Flags: (*) Active, (!) Administratively disabled.
(g) Load Sharing Port
(G) Multi-switch LAG Group port
History
This command was first available in ExtremeXOS 15.3.
MRVP VLAN registration output was added in 15.3.2.
Flag showing if the MVRP-enabled port is an MLAG port added in ExtremeXOS 22.1
Platform Availability
This command is available on all platforms.