Print
this page
Email this topic
Feedback
View PDF
Download EPUBenable iproute mpls-next-hop
enable iproute mpls-next-hop
Description
Enables IP forwarding over MPLS LSPs for the default VR.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
This command enables IP forwarding over MPLS LSPs for the default VR. When enabled, LSP next hops can be used to tunnel IP traffic across the MPLS network. By default, IP forwarding over MPLS LSPs is disabled.
Note
You can enable the use of LSP next hops, or you can enable DHCP/BOOTP relay. The software does not support both features at the same time.Example
The following command enables IP forwarding over MPLS LSPs:
enable iproute mpls-next-hop
History
This command was first available in ExtremeXOS 11.6.
Platform Availability
This command is available only on the platforms that support MPLS as described in the Feature License Requirements document.