Print
this page
Email this topic
Feedback
View PDF
Download EPUBconfigure forwarding L2-protocol fast-convergence
configure forwarding L2-protocol fast-convergence
on | off
Description
Configures the switch to flooding the unicast traffic during L2 protocol convergence.
Syntax Description
| on | Used to avoid flooding the unicast traffic during L2 protocol convergence. (default) |
| off | Used to Temporarily flooding unicast traffic during L2 protocol convergence. |
Default
On.
Usage Guidelines
Use this command to influence the L2-protocol convergence when topology changes in the network to minimize the congestion.
Example
The following command will influence the L2-Protocol control traffic:
configure forwarding L2-protocol fast-convergence off
History
This command was first available in ExtremeXOS 15.1.3.
Platform Availability
This command is available on Summit X440-G2, X450-G2, X460-G2, X620, X670-G2, X770 series switches.