enable mpls rsvp-te lsp

enable mpls rsvp-te lsp [lsp_name | all]

Description

Enables one or more RSVP-TE LSPs.

Syntax Description

lsp_name Specifies the ingress LSP within the switch to be enabled.
all Enables all RSVP-TE configured ingress LSPs.

Default

Enabled.

Usage Guidelines

When an RSVP-TE LSP is enabled, the switch attempts to set up the LSP by signaling the destination by sending a path message using the assigned path and profile. By default, all newly created LSPs are enabled and can become active when the LSP has been configured. Note that an LSP must be configured with at least one path before it can be signaled.

Example

The following command enables all RSVP-TE-configured LSPs:

enable mpls rsvp-te lsp all

History

This command was first available in ExtremeXOS 11.6.

Platform Availability

This command is available only on the platforms that support MPLS as described in the Feature License Requirements document.