Print
this page
Email this topic
Feedback
View PDF
Download EPUBconfigure mlag peer interval
configure mlag peer peer_name
interval
msec
Description
Configures the length of time between health check hello packets.
Syntax Description
| peer_name | Specifies an alpha numeric string identifying the MLAG peer. |
| msec | Specifies an MLAG peer health-check hello interval in milliseconds. The range is 50-10000ms. The default is 1000ms. |
Default
The interval default is 1000 milliseconds.
Usage Guidelines
Use this command to configure the length of time between health check hello packets exchanged between MLAG peer switches. After three health check hellos are lost, the MLAG peer switch is declared to be failed, triggering an MLAG topology change.Example
The following command sets an interval of 700 milliseconds on the switch101 peer. switch:
configure mlag peer switch101 interval 700
History
This command was first available in ExtremeXOS 12.5.
Platform Availability
This command is available on all platforms.