Print
this page
Email this topic
Feedback
View PDF
Download EPUBconfigure network-clock clock-source input
configure network-clock clock-source
input {[sync-e | ptp |region [E1 | T1]}
Description
Configure the input network clock source as Sync-E or PTP. A region can also be configured using this command.
Syntax Description
| sync-e | Synchronous Ethernet (ITU-T standard) (Default). |
| ptp | Precision Time Protocol. |
| E1 | Specifies the European and Asian clock region selection (Default). |
| T1 | Specifies the North American clock region selection. |
Default
The default input clock source is Synchronous Ethernet. The default region is E1.
Usage Guidelines
The Summit X460-G2 series switches have clock sources beyond SyncE. The
clock which drives all of the ports on a switch may be selected from:
-
SyncE (Synchronous Ethernet).
-
PTP – Precision Time Protocol, an optional 1588v2 module.
Example
The following command configures the region as T1:
configure network-clock clock-source input region t1
The following command configures the network-clock source as TDM:
configure network-clock clock-source input tdm
History
This command was first available in ExtremeXOS 15.1.
Platform Availability
This command is available on the Summit X460-G2 series switches.