Print
this page
Email this topic
Feedback
View PDF
Download EPUBshow network-clock ptp boundary unicast-slave
show network-clock ptp boundary unicast-slave [{vlan} vlan_name | vlan all]
Description
Show the unicast slave table of the specified clock port, or all clock ports. This command is only available for boundary clocks.
Syntax Description
| boundary | Specifies the boundary clock. |
| unicast-slave | Specifies table of unicast masters. |
| vlan | VLAN. |
| vlan_name | VLAN name. |
| vlan all | Specifies all vlans. |
Default
N/A.
Usage Guidelines
Use this command to display the unicast master table of the specified clock port or all clock ports. This command is only available for boundary clocks.
Example
The following command displays the unicast master table for all clock ports:
# show network-clock ptp boundary unicast-slave vlan all VLAN Name IP Address ptp-m1 7.1.1.1 ptp-m1 7.1.2.1 ptp-m1 88.3.5.1
History
This command was first available in ExtremeXOS 15.1.
Platform Availability
This command is available on the Summit X460-G2, X670-G2, and X770.
Note
PTP commands can be used only with the Network Timing feature pack.