configure ospf cost
configure ospf [area
area-identifier | vlan [vlan-name | all]] cost [automatic | cost]
Description
Configures the cost metric of one or all interface(s) or an area.
Syntax Description
area-identifier | Specifies an OSPF area. |
vlan-name | Specifies a VLAN name. |
all | Specifies all VLANs. |
automatic | Determine the advertised cost from the OSPF metric table. |
cost | Specifies the cost metric. |
Default
The default cost is automatic.
Usage Guidelines
The range is 1 through 65535.
Example
The following command configures the cost metric of the VLAN accounting:
configure ospf vlan accounting cost 10
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on platforms with an Advanced Edge or Core license as described in the Feature License Requirements document.