Print
this page
Email this topic
Feedback
View PDF
Download EPUBshow network-clock ptp boundary unicast-master
show network-clock ptp [boundary | ordinary] unicast-master [{vlan} vlan_name | vlan all]
Description
Show the unicast master table of the specified clock port or all clock ports. This command is available only for boundary and ordinary clocks.
Syntax Description
| boundary | Specifies the boundary clock. |
| ordinary | Specifies the ordinary clock. |
| unicast-master | Specifies table of unicast masters. |
| vlan | VLAN. |
| vlan_name | VLAN name. |
| vlan all | Specifies all vlans. |
Default
N/A.
Usage Guidelines
Use this command to display the unicast master table of the specified clock port or all clock ports. This command is available only for boundary and ordinary clocks.
Example
The following command displays the unicast master table for all clock ports:
# show network-clock ptp boundary unicast-master vlan all VLAN Name IP Address Log Query gm1-lpbk 1.1.1.101 3 ptp-s1 22.55.0.2 3
History
This command was first available in ExtremeXOS 15.1.
Platform Availability
This command is available on the Summit X670-G2, X460-G2, and X770 series switches.
Note
PTP commands can be used only with the Network Timing feature pack.