configure snmp compatibility ip-fragmentation
configure snmp compatibility ip-fragmentation
[allow | disallow]
Description
Enables or disables allowing IP fragmentation for the SNMP PDUs.
Syntax Description
compatibility |
Compatibility options. |
ip-fragmentation |
Compatibility option relate to the IP fragmentation for SNMP PDUs. |
allow |
All fragmentation of outgoing SNMP PDUs. |
disallow |
Set Do not Fragment (DF) bit in outgoing SNMP PDUs. |
Default
Disallow.
Usage Guidelines
Use this command to enable or disable allowing IP fragmentation for the SNMP PDUs.
Example
The following example shows output of the show management command:
Switch # show management CLI idle timeout : Enabled (20 minutes) CLI max number of login attempts : 3 CLI max number of sessions : 8 CLI paging : Enabled (this session only) CLI space-completion : Disabled (this session only) : : : SNMP access : Enabled : Access Profile : not set SNMP Compatibility Options : IP Fragmentation : Allow SNMP Traps : Enabled : :
History
This command was first available in ExtremeXOS 15.5.
Platform Availability
This command is available on all platforms.