Print
this page
Email this topic
Feedback
View PDF
Download EPUBconfigure eaps cfm
Description
Notifies the CFM that EAPs is interested in notifications for the specified MEP and RMEP pair.
Syntax Description
| cfm | Connectivity Fault Management. |
| add | Add a MEP group. |
| delete | Delete a MEP group. |
| group group_name | MEP group to bind. |
Default
N/A.
Usage Guidelines
This command notifies CFM that EAPs is interested in notifications for this MEP and RMEP pair. This MEP should already be bound to a physical port, so when notification is received, EAPS associates that notification with a ring-port failure.
Example
The following command deletes the control VLAN keys from the EAPS domain eaps_1:
configure eaps cfm add
History
This command was first available in ExtremeXOS 15.2.
Platform Availability
This command is available on all EXOS platforms; however, not all platforms support hardware-based CFM. Platforms with no hardware-based CFM support are limited to software-based CFM transmit intervals of 100 ms or higher. Hardware-based intervals can go as low as 3.3 ms.