configure stpd trap new-root
configure stpd stpd_name
trap
new-root [on | off]
Description
Enables and disables the new-root trap.
Syntax Description
stpd_name | Specifies an STPD name on the switch. |
on | Enables the new-root trap. |
off | Disables the new-root trap. |
Default
By default, the trap is enabled (on).
Usage Guidelines
The new-root trap is sent when the new root bridge is elected.
Example
The following example disables the new-root trap for the STP domain r1.
configure stpd r1 trap new-root off
History
This command was first available in ExtremeXOS 15.7.1.
Platform Availability
This command is available on all platforms.