configure vrrp fabric-routing
configure vrrp {vlan
vlan_name
vr
vr_id | all} fabric-routing [on | off]
Description
This command enables fabric routing mode on the VRRP router. This setting can be done on all VRRP routers, but it will not affect the VRRP master router. It will take effect in VRRP Backup router. With respect to VRRP state, backup state will be used for CLI and MIB, so that standard MIB can be used for retrieving the states.
Syntax Description
vlan_name | VLAN name. |
vr_id | Virtual router ID value. |
all | Configuration affects all VRRP VRs. |
on | Enable L3 forwarding capability for a VRRP router in backup state. |
off | Disable L3 forwarding capability for a VRRP router in backup state (default). |
Default
Off.
Usage Guidelines
None.
History
This command was first available in ExtremeXOS 21.1.
Platform Availability
This command is supported on all platforms.