Print
this page
Email this topic
Feedback
View PDF
Download EPUBenable edp ports
Description
Enables the Extreme Discovery Protocol (EDP) on one or more ports.
Syntax Description
|
ports |
Specifies one or more ports or slots and ports. |
|
all |
Specifies all ports on the switch. |
Default
Enabled.
Usage Guidelines
On a SummitStack, ports can be a list of slots and ports. On a stand-alone switch, ports can be one or more port numbers. For a detailed explanation of port specification, see Port Numbering in Command Reference Overview
EDP is useful when Extreme Networks switches are attached to a port.
-
Switch MAC address (switch ID).
-
Switch software version information.
-
Switch IP address.
-
Switch VLAN information.
-
Switch port number.
-
Switch port configuration data: duplex, and speed.
Example
The following command enables EDP on port 3 on a switch:
enable edp ports 3
History
This command was first available in ExtremeXOS 10.1.
The port configuration data was added in ExtremeXOS 11.0.
Platform Availability
This command is available on all platforms.