configure ip-fix source ip-address
Description
Configures the source IP address used to communicate to the collector.
Syntax Description
ipaddress | Specifies the source IP address to be used in IPFIX packets. |
vrname | Specifies a virtual router name. |
Default
Switch IP address of the interface the traffic egresses.
Usage Guidelines
Use this command to specify the source IP address and VR to use when sending from the switch to a given collector. Otherwise, the default is used.
There is one collector.
To reset to the default of the switch IP address, use the unconfigure ip-fix ip-address command.
Example
The following command configures an IP address of 1.1.1.1 and VR of finance:
configure ip-fix source ip-address 1.1.1.1 finance
History
This command was first available in ExtremeXOS 12.5.
Platform Availability
This command is available on the Summit X460-G2 series switches.