configure cfm segment dot1p
configure cfm segment segment_name
dot1p
dot1p_priority
Description
Configures the priority for the segment.
Syntax Description
segment-name | An alpha numeric string identifying the segment name. |
dot1p_priority | Priority value that is set in the DMM/DMR. The range is 0 to 7. |
Default
The default is 6.
Usage Guidelines
Use this command to configure the dot1p priority that a DMM/DMR frame can get.
Example
The following example configures a dot1p priority of 3 for segment s2.
configure cfm segment s2 dot1p 3
History
This command was first available in ExtremeXOS 12.3.
Platform Availability
This command is available on all platforms.