configure mpls rsvp-te lsp change

configure mpls rsvp-te lsp lsp_name change [path_name | any] use profile [{standard_profile_name} {frr_profile_name}]

Syntax Description

lsp_name Specifies the name of the LSP you are changing.
path_name Specifies the name of the path to be used by the specified LSP.
any Configures the specified LSP to use any path.
standard_profile_ name Specifies a profile to be applied to the specified LSP. If the profile name is omitted, the profile named default is used.
frr_profile_name Specifies a fast reroute (FRR) profile to be applied to the detour LSP that backs up the specified LSP.

Default

N/A.

Usage Guidelines

None.

Example

This command changes the LSP named aus to use any available path:

configure mpls rsvp-te lsp aus change any

History

This command was first available in ExtremeXOS 11.6.

The fast reroute capability was added in ExtremeXOS 12.1.

Platform Availability

This command is available only on the platforms that support MPLS as described iin the Feature License Requirements document.