Print
this page
Email this topic
Feedback
View PDF
Download EPUBconfigure vman add ports
Description
Adds one or more ports to a VMAN.
Syntax Description
| vman-name | Specifies the name of the VMAN to configure. |
| vman_id | Specifies the ID of the VMAN to configure |
| all | Specifies all switch ports. |
| port_list | Specifies a list of ports. |
| untagged | Configures the specified ports as Customer Network Ports (CNPs). |
| tagged | Configures the specified ports as Provider Network Ports (PNPs), which are also called VMAN network ports. |
| port-cvid | Port's customer VLAN ID used for untagged packets. |
| port_cvid | Customer VLAN ID assigned to untagged packets from 1. |
Default
If you do not specify a parameter, the default value is untagged, which creates a CNP.
Usage Guidelines
This command adds ports as either CNPs or PNPs. To add a port to a VMAN as a CEP, use the following command:
configure vman add ports cepThe VMAN must already exist before you can add (or delete) ports. VMAN ports can belong to load-sharing groups.
When a port is configured serve as a CNP for one VMAN and A PNP for another VMAN, it inspects the VMAN ethertype in received packets. Packets with a matching ethertype are treated as tagged and switched across the associated PNP VMAN. Packets with a non-matching ethertype are treated as untagged and forwarded into the associated CNP VMAN.
When a port is configured only as a CNP (an untagged VMAN member), whether the VMAN ethertype is 0x8100 or otherwise, all received packets ingress the associated VMAN regardless of the packet's tagging.
Note
If you use the same name across categories (for example, STPD and EAPS names), we recommend that you specify the identifying keyword as well as the actual name. If you do not use the keyword, the system may return an error message.The following guidelines apply to all platforms:
- You must enable or disable jumbo frames before configuring VMANs. You can enable or disable jumbo frames on individual ports or on the entire switch. See Configuring Ports on a Switch for more information on configuring jumbo frames.
- Each port can serve in only one VMAN role per VMAN. When multiple roles are configured on a port, each role must be configured for a different VMAN.
- Multiple VMAN roles can be combined on one port with certain VLAN types as shown in the following table.
Port Support for Combined VMAN Roles and VLANs
| Platform | Combined CNP, CEP, and Tagged VLAN , | Combined PNP, CNP, and CEP | Combined PNP and Tagged VLAN | Combined PNP and Untagged VLAN |
|---|---|---|---|---|
| Summit X460-G2, X670-G2, and X770 | X | X |
X4 |
X |
Note
If you already configured VLANs and VMANs on the same switch using ExtremeXOS 11.4, you cannot change the VMAN ethertype from 0X8100 without first removing either the VLAN or VMAN configuration.Example
The following example assigns ports 1:1, 1:2, 1:3, and 1:6 to a VMAN named accounting:
configure vman accounting add ports 1:1, 1:2, 1:3, 1:6 tag 100
History
This command was first available in ExtremeXOS 11.0.
The cvid keyword was added in ExtremeXOS 15.3.2.
The vman_id variable was added in ExtremeXOS 16.1.
The cvid keyword was removed in ExtremeXOS 21.1.
Platform Availability
This command is available on all platforms.