Print
this page
Email this topic
Feedback
View PDF
Download EPUBconfigure ntp vr
configure ntp vr vr-name
Description
Use this command to change the virtual router on which NTP is configured (that is, enabled).
Syntax Description
| vr-name | Name of the virtual router. |
Default
NTP is configured on VR-Default by default.
Usage Guidelines
NTP can be enabled on only one virtual router at once.
You must disable NTP globally before configuring NTP on another virtual router.
Example
The following example configures NTP on the virtual router "vr-acme":
configure ntp vr vr-acme
History
This command was first available in ExtremeXOS 15.7.
Platform Availability
This command is available on all platforms.