run erps force-switch | manual-switch
run erps ring-name [force-switch | manual-switch] {port} port
Description
Set up force and manual switch triggers to the ERPS ring/sub-ring.
Syntax Description
ring-name | Alphanumeric string that identifies the ERPS ring. |
force-switch | Force switch operation. |
manual-switch | Manual switch operation. |
port | The slot:port number for the ring port. |
Default
N/A.
Usage Guidelines
Use this command to set up force and manual switch triggers to the ERPS ring/sub-ring.
Example
The following command sets up force switch operation on port 6 of
an ERPS ring named
“ring1”:
run erps ring1 force-switch port 6
History
This command was first available in ExtremeXOS 15.1.
Platform Availability
This command is available on all platforms supported in 12.6 and forward that are running ExtremeXOS.