Print
this page
Email this topic
Feedback
View PDF
Download EPUBconfigure network-clock ptp (priority)
Description
Assign priority1 and priority2 values for a PTP clock instance.
Syntax Description
|
boundary |
Boundary clock instance. |
|
ordinary |
Ordinary clock instance. |
|
priority1 |
Priority1 of the clock. |
|
priority2 |
Priority2 of the clock. |
|
priority |
Value of priority. 0 is the highest priority. The default value is 128, the range is 0-255. |
Default
The default value of the priority is 128. The range is 0-255.
Usage Guidelines
Use this command to assign priority1 and priority2 values for a PTP clock instance. This command is available only for boundary and ordinary clocks.
Example
The following example assigns priority1 and priority2 values for the boundary clock:
configure network-clock ptp boundary priority1 50 configure network-clock ptp boundary priority2 128
The following example assigns priority1 and priority2 values for ordinary clock:
configure network-clock ptp ordinary priority1 10 configure network-clock ptp ordinary priority2 200
History
This command was first available in ExtremeXOS 15.1.
Platform Availability
This command is available on Summit X770, X670-G2, and X460-G2 series switches.
Note
PTP commands can be used only with the Network Timing feature pack.