show mpls
show mpls
Description
Displays MPLS configuration information.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
The show mpls command displays the current values for all
the MPLS configuration parameters that apply to the entire switch. The parameters
displayed include:
- MPLS and MPLS protocol (RSVP-TE and LDP) status.
- SNMP traps configuration.
- EXP examination/replacement configuration.
- the MPLS LSR ID.
- the list of the VLANs which have been added to MPLS.
Example
The following command displays the MPLS configuration parameters for the switch:
# show mpls MPLS System MPLS System : User VR (Green) MPLS Admin Status : Enabled MPLS Oper Status : Enabled RSVP-TE Admin Status : Enabled RSVP-TE Oper Status : Enabled LDP Admin Status : Enabled LDP Oper Status : Enabled SNMP Traps : Disabled L2VPN SNMP Traps : Enabled EXP Examination : Disabled EXP Replacement : Disabled LSR ID : 11.100.100.20
History
This command was first available in ExtremeXOS 11.6
Platform Availability
This command is available only on the platforms that support MPLS as described in the Feature License Requirements document.