show bfd vlan
show bfd vlan {vlan_name}
Description
Displays the BFD settings for the specified VLAN.
Syntax Description
vlan_name |
Specifies the VLAN name. |
Default
N/A.
Usage Guidelines
Use this command to display the BFD settings on a specified VLAN.
Example
The following command displays the BFD settings for the VLAN vlan10:
show bfd vlan vlan10
Following is sample output from this command:
VLAN : vlan10 BFD : Enabled Tx Interval : 1000 Rx Interval : 1000 Detection Multiplier : 3 Authentication : None
History
This command was first available in ExtremeXOS 12.4.
Platform Availability
This command is available on all platforms.