Print
this page
Email this topic
Feedback
View PDF
Download EPUBshow erps
show erps
Description
Display global information for ERPS.
Syntax Description
N/A.
Default
N/A.
Usage Guidelines
Use this command to display global information for ERPS.
Example
# show erps
ERPS Enabled: Yes
ERPS Display Config Warnings: On
ERPS Multicast Add Ring Ports: Off
ERPS Multicast Send IGMP Query: On
ERPS Multicast Temporary Flooding: Off
ERPS Multicast Temporary Flooding Duration: 15 sec
Number of ERPS instances: 1
# ERPS ring configuration :
--------------------------------------------------------------------------------
Ring State Type East West Control-Vlan VID
--------------------------------------------------------------------------------
R1 Protection R r 21 +20 cvl (1000)
--------------------------------------------------------------------------------
where State: Init/Idle/Protection/Manual-Switch/Force-Switch/Pending
Type: (I) Interconnected node, (N) RPL Neighbor,
R) RPL Owner, (X) Ring node
Flags: (n) Non-revertive, (r) Revertive,
(+) RPL Protection Port, (^) RPL Neighbor Port
(f) Force Switch Port, (m) Manual Switch Port
History
This command was first available in ExtremeXOS 15.1.
Platform Availability
This command is available on all platforms supported in 12.6 and forward that are running ExtremeXOS.