Print
this page
Email this topic
Feedback
View PDF
Download EPUBconfigure stpd ports restricted-role disable
configure stpd stpd_name ports restricted-role disable port_list
Description
Disables restricted role on the specified port inside the core network.
Syntax Description
| stpd_name | Specifies an STPD name on the switch. |
| port_list | Specifies one or more ports or slots and ports. |
Default
N/A.
Usage Guidelines
The restricted role is disabled by default. If set, it can cause a lack of spanning tree connectivity. A network administrator enables the restricted role to prevent bridges external to a core region of the network from influencing the spanning tree active topology, possibly because those bridges are not under the full control of the administrator.
Note
Disabling Restricted Role at CIST is inherited by all MSTI.
Example
The following command disables restricted role for s1 on port 6:3:
configure stpd s1 ports restricted-role disable 6:3
History
This command was first available in ExtremeXOS 12.1.
This command was added to RSTP in ExtremeXOS 11.6 and 12.0.3.
Platform Availability
This command is available on all platforms.