configure netlogin ports no-restart
Description
Disables the network login port restart feature.
Syntax Description
all | Specifies all network login ports. |
port_list | Specifies one or more network login ports. |
Default
The default setting is no-restart; the network login port restart feature is disabled.
Usage Guidelines
Use this command to disable the network login port restart feature on a network login port.
Configure network login port restart on ports with directly attached supplicants. If you use a hub to connect multiple supplicants, only the last unauthenticated supplicant causes the port to restart.
Displaying the Port Restart Configuration
To display the network login settings on the port, including the configuration for port restart, use the following command:
show netlogin port port_listOutput from this command includes the enable/disable state for network login port restart.
Example
The following command disables network login port restart on port 1:1:
configure netlogin ports 1:1 no-restart
History
This command was first available in ExtremeXOS 11.6.
Platform Availability
This command is available on all platforms.