disable icmp parameter-problem
Description
Disables the generation of an ICMP parameter-problem message on one or all VLANs.
Syntax Description
name | Specifies a VLAN name. |
Default
Enabled.
Usage Guidelines
Disables the generation of an ICMP parameter-problem message (type 12) when the switch cannot properly process the IP header or IP option information. If a VLAN is not specified, the command applies to all IP interfaces.
This command only affects the generation of certain ICMP packets. Filtering of ICMP packets usually forwarded by the switch is controlled by the access-list commands.
Example
The following example disables the generation of an ICMP parameter-problem message on VLAN "accounting":
disable icmp parameter-problem vlan accounting
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on all platforms.