configure ip-fix flow-key nonip
Description
Configures the settings for the flow key(s) for non-IP type data.
Syntax Description
src-mac | Specifies the source MAC address field as part of the flow key. |
dest-mac | Specifies the destination MAC address field as part of the flow key. |
ethertype | Specifies the Ethertype field as part of the flow key. |
vlan-id | Specifies the VLAN ID field as part of the flow key. |
priority | Specifies the VLAN priority field as part of the flow key. |
tagged | Specifies the VLAN tagged field as part of the flow key. |
Default
All flow keys.
Usage Guidelines
Use this command to specify which of the designated flow-keys to use. This overrides the default which is all keys. The template sent to the Collector (per the IPFIX standard) contains only the keys used.
-
Source MAC Address (48).
-
Destination MAC Address (48).
-
Ethertype (16).
-
VLAN ID (12).
-
VLAN Priority (3).
-
VLAN Tagged (1).
To unconfigure, use the unconfigure ip-fix flow-key command.
To display the configured flow keys, use the show ip-fix command.
Example
The following command configures non-IP traffic to use the source MAC address and VLAN ID:
configure ip-fix flow-key src-mac vlan-id
History
This command was first available in ExtremeXOS 12.5.
Platform Availability
This command is available on the Summit X460-G2 series switches.