Print
this page
Email this topic
Feedback
View PDF
Download EPUBshow bootprelay configuration ipv6
show bootprelay
Description
Displays various BOOTP Relay configuration details.
Syntax Description
| ipv4 | Specifies unconfiguring the DHCPv4 BOOTP Relay service (default). |
| ipv6 | Specifies unconfiguring the DHCPv6 BOOTP Relay service. |
| vlan | Unconfigures BOOTP relay for a specified VLAN. |
| vlan_name | Specifies the VLAN name. |
| include-secondary | Removes the include-secondary configuration for the specified VLAN. |
Default
N/A.
Usage Guidelines
Use this command to display BOOTP Relay details for IPv6.
Example
The following command :
# show bootprelay configuration ipv6
DHCPv6 BOOTP Relay : Enabled on virtual router "VR-Default"
Include Secondary : Enabled (parallel)
VLAN DHCPv6 BOOTP Relay
------------------------ ------------------
VLAN "Default":
BOOTP Relay : Disabled
VLAN "v1":
BOOTP Relay : Enabled
Include Secondary : Enabled (sequential)
VLAN "v2":
BOOTP Relay : Enabled
Include Secondary : Enabled (parallel)
History
This command was first available in ExtremeXOS 15.4.
Platform Availability
This command is available on all platforms.