disable ntp broadcast-client
disable ntp broadcast-client
Description
Disables an NTP broadcast client on the switch.
Syntax Description
N/A.
Default
An NTP broadcast client is enabled by default.
Usage Guidelines
If the broadcast client function is enabled, the system can receive broadcast-based NTP messages and process them only if a VLAN is enabled for NTP and the VLAN is active.
Example
The following command disables an NTP broadcast client on the switch:
disable ntp broadcast client
History
This command was first available in ExtremeXOS 12.7.
Platform Availability
This command is available on all platforms.