disable vman cep egress filtering ports
disable vman cep egress filtering ports {port_list | all}
Description
Disables the egress filtering of CVIDs that are not configured in the CVID map for a CEP.
Syntax Description
port_list | Specifies a list of ports. |
all | Specifies all switch ports. |
Default
Egress CVID filtering is disabled.
Usage Guidelines
To view the configuration setting for the egress CVID filtering feature, use the show ports information command.
![Note](../../images/Note_Note.png)
Note
When CVID egress filtering is enabled, it reduces the maximum number of CVIDs supported on a port. The control of CVID egress filtering applies to fast-path forwarding. When frames are forwarded through software, CVID egress filtering is always enabled.Example
The following example disables egress CVID filtering on port 1:
disable vman cep egress filtering port 1
History
This command was first available in ExtremeXOS 12.6.
Platform Availability
This command is available on all platforms.