Print
this page
Email this topic
Feedback
View PDF
Download EPUBshow dhcp-client state
show dhcp-client {ipv4 | ipv6} state {vlan}
Description
Displays the current DHCP/BOOTP client state for each vlan.
Syntax Description
This command has no arguments or variables.
Default
If the IPv4 or IPv6 keyword is not specified, IPv4 is the default.
Usage Guidelines
None.
Example
The following command displays the DHCP/BOOTP status for all VLANs:
show dhcp-client state
Depending on your configurations, output from this command is similar to the following:
# sh dhcp-client ipv6 state v3
Client VLAN : v3
Client Type : Stateful
Identity Association Type : IA-NA
IA-NA : Identity Association for Non-Temporary
Addresses
Identity Association Identifier : 96:7e:1f:5a
Client IP Address : 2001::550b:ebf8:d0b8:9a8
Client Identifier Type : Link-Layer Address Plus Time
Client Identifier : 00:01:00:01:1a:85:0a:bd:00:04:96:7e:1a:5a:00:00
Server Identifier : 00:01:00:01:13:e0:f4:93:00:11:43:c0:06:50
State : Bound
Identity Association Types:
IA-NA - Identity Association for Non-Temporary Addresses,
IA-TA- Identity Association for Temporary Addresses.
History
This command was first available in ExtremeXOS 10.1.
This command was modified in ExtremeXOS 15.6 to include the ipv4 and ipv6 keywords.
Platform Availability
This command is available on all platforms.