disable icmp time-exceeded
Description
Disables the generation of ICMP time exceeded messages on one or all VLANs.
Syntax Description
name | Specifies a VLAN name. |
Default
Enabled.
Usage Guidelines
Disables the generation of an ICMP time exceeded message (type 11) when the TTL field expires during forwarding. IP multicast packets do not trigger ICMP time exceeded messages. If a VLAN is not specified, the command applies to all IP interfaces.
This command only affects the generation of certain ICMP packets. Filtering of ICMP packets usually forwarded by the switch is controlled by the access-list commands.
Example
The following example disables the generation of ICMP time exceeded messages on VLAN "accounting":
disable icmp time-exceeded vlan accounting
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on all platforms.