configure erps neighbor port
configure erps ring-name
neighbor-port
port
Description
Add RPL (ring protection link) neighbor configuration for the ERPS ring.
Syntax Description
ring-name | Alphanumeric string that identifies the ERPS ring. |
port | The slot:port number for RPL neighbor. |
Default
N/A.
Usage Guidelines
Use this command to add RPL neighbor configuration for the ERPS ring.
![Note](../../images/Note_Note.png)
Note
This command implicitly makes the node on which it is configured the RPL neighbor.
Example
The following command adds RPL neighbor on port 5 to an ERPS ring named “ring1”:
configure erps ring1 neighbor-port 5
History
This command was first available in ExtremeXOS 15.1.