Print
this page
Email this topic
Feedback
View PDF
Download EPUBconfigure eaps hello-pdu-egress
configure eaps name hello-pdu-egress [primary-port | secondary-port]
Description
Configures the port through which a master node sends EAPS hello PDUs.
Syntax Description
| name | Specifies the name of an EAPS domain. |
Default
Default is the primary port.
Usage Guidelines
This command is provided for special network topologies that use spatial reuse and require that all EAPS hello PDUs travel in the same direction on the ring.
Note
We recommend the default (primary-port) configuration for this command.
Example
The following command configures the master switch to send EAPS hello packets from the secondary port:
configure eaps "domain12" hello-pdu-egress secondary-port
History
This command was first available in ExtremeXOS 12.4.2.
Platform Availability
This command is available on all platforms.