create tunnel gre destination source
create tunnel tunnel_name
gre
destination
destination-address
source
source-address
Description
Allows switch administrators to add a GRE tunnel. This command is in-line with adding an ipv6-in-ipv4 tunnel.
Syntax Description
gre | Generic Routing Encapsulation tunnel. |
destination-address | IPv4 destination address of the tunnel. |
source-address | IPv4 source address of the tunnel. |
Default
No GRE tunnels exist in the system.
Usage Guidelines
Use this command to add a GRE tunnel.
Example
create tunnel myGREtunnel gre destination 10.0.0.2 source 10.0.0.1
History
This command was first available in ExtremeXOS 15.3.
Platform Availability
This command is available on all platforms.