Print
this page
Email this topic
Feedback
View PDF
Download EPUBconfigure inline-power label ports
configure inline-power label string ports port_list
Description
Lets you create your own label for a specified PoE port or group of PoE ports.
Syntax Description
| string | Specifies a name up to 15 characters in length to identify the specified power port(s). |
| port_list | Specifies one or more ports or slots and ports. |
Default
No label.
Usage Guidelines
Use the show inline-power configuration ports command, as shown in the following example, to display inline power configuration information, including the label (if any) for each port:
show inline-power configuration port 3:1-10
Following is sample output from this command on a SummitStack:
Port Config Operator Limit Priority Label 3:1 Enabled 16000 mW Low finance 3:2 Enabled 15000 mW Low finance 3:3 Enabled 15000 mW Low 3:4 Enabled 15000 mW Low 3:5 Enabled 15000 mW Low 3:6 Enabled 15000 mW Low marketing 3:7 Enabled 15000 mW Low marketing 3:8 Enabled 15000 mW Low marketing 3:9 Enabled 15000 mW Low 3:10 Enabled 15000 mW Low
Example
The following command assigns the name “alpha-test_1” to port 1 on slot 4:
config inline-power label alpha-test_1 ports 4:1
History
This command was first available in ExtremeXOS 11.1.
Platform Availability
This command is available on the PoE devices listed in Extreme Networks PoE Devices.