Print
this page
Email this topic
Feedback
View PDF
Download EPUBdisable rip aggregation
disable rip aggregation
Description
Disables the RIP aggregation of subnet information on a RIP version 2 (RIPv2) router.
Syntax Description
This command has no arguments or variables.
Default
RIP aggregation is disabled by default.
Usage Guidelines
The disable
RIP aggregation command disables the RIP aggregation of subnet information
on a switch configured to send RIPv2-compatible traffic. The switch
summarizes subnet routes to the nearest class network route. The
following rules apply when using RIP aggregation:
-
Within a class boundary, no routes are aggregated.
-
If aggregation is disabled, subnet routes are never aggregated, even when crossing a class boundary.
Example
The following command disables RIP aggregation on the interface:
disable rip aggregation
History
This command was first available in ExtremeXOS 10.1.
Platform Availability
This command is available on all platforms with an Edge, Advanced Edge, or Core license.