Print
this page
Email this topic
Feedback
View PDF
Download EPUBconfigure mirror to port
configure mirror mirror_name {to [port
port | port_list
port_list | loopback port
port ] {remote-tag
rtag | port
none}
Description
Updates or specifies the "to port" definitions for a named mirroring instance.
Syntax Description
| mirror_name | Specifies the mirror name. |
| port | Specifies the mirror output port. |
| port_list | Specifies the list of ports where traffic is to be mirrored. |
| loopback port | Specifies an otherwise unused port required when mirroring to a port_list. The loopback-port is not available for switching user data traffic. |
| port | Specifies a single loopback port that is used internally to provide this feature. |
| remote-tag | Specifies the value of the VLAN ID used by the mirrored packets when egressing the monitor port. |
| port | Specifies the port definition for the mirroring instance. |
| none | Specifies none for the to port definition. |
Default
Disabled.
Usage Guidelines
Use this command to update, or specify the "to port" definitions for a named mirroring instance.
Example
The following example configures a mirror instance to port 3, slot 4 :
configure mirror to port 3:4
History
This command was first available in ExtremeXOS 15.3.
Platform Availability
This command is available on all platforms.