enable mpls protocol rsvp-te
Description
Enables RSVP-TE for the switch.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
When RSVP-TE is enabled, configured LSPs begin the process of TE LSP establishment and VLAN interfaces that have RSVP-TE enabled begin processing RSVP path/reserve messages. By default, RSVP-TE is disabled. While RSVP-TE is transitioning to the enabled state, only the MPLS show commands are accepted.
Example
The following command globally enables RSVP-TE on the switch:
enable mpls protocol rsvp-te
History
This command was first available in ExtremeXOS 11.6.
Platform Availability
This command is available only on the platforms that support MPLS as described in the Feature License Requirements document.