Adds an SNMPv3 community entry.
hex_community_index | Specifies the row index in the snmpCommunity table as a hex value supplied as a colon separated string of hex octets. |
community_index | Specifies the row index in the snmpCommunity Table as an ASCII value. |
hex_community_name | Specifies the community name as a hex value supplied as a colon separated string of hex octets. |
community_name | Specifies the community name as an ASCII value. |
hex_user_name | Specifies the USM user name as a hex value supplied as a colon separated string of hex octets. |
user_name | Specifies the USM user name as an ASCII value. |
tag | Specifies the tag used to locate transport endpoints in SnmpTargetAddrTable. When this community entry is used to authenticate v1/v2c messages, this tag is used to verify the authenticity of the remote entity.hex_transport_tag—Specifies a hex value supplied as a colon separated string of hex octetstransport_tag—Specifies an ASCII value |
volatile | Specifies volatile storage. |
N/A.
Use this command to create or modify an SMMPv3 community in the community MIB.
switch # configure snmp add community readonly extreme store-encrypted switch # show snmpv3 community Community Index : extreme Community Name : hys{fnj (encrypted) Security Name : v1v2c_ro Context EngineID : 80:00:07:7c:03:00:04:96:27:b6:63 Context Name : Transport Tag : Storage Type : NonVolatile Row Status : Active switch # configure snmp add community readwrite extreme123 switch # show snmpv3 community Community Index : extreme Community Name : hys{fnj (encrypted) Security Name : v1v2c_ro Context EngineID : 80:00:07:7c:03:00:04:96:27:b6:63 Context Name : Transport Tag : Storage Type : NonVolatile Row Status : Active Community Index : extreme123 Community Name : extreme123 Security Name : v1v2c_rw Context EngineID : 80:00:07:7c:03:00:04:96:27:b6:63 Context Name : Transport Tag : Storage Type : NonVolatile Row Status : Active switch # show configuration "snmp" # # Module snmpMaster configuration. # configure snmpv3 add community extreme encrypted name hys{fnj user v1v2c_ro configure snmpv3 add community extreme123 name extreme123 user v1v2c_rw The following command creates an entry with the community index comm_index, community name comm_public, and user (security) name v1v2c_user: configure snmpv3 add community comm_index name comm_public user v1v2c_user
This command was first available in ExtremeXOS. 10.1.
The hex_community_index, hex_community_name, hex_user_name, and hex_transport_tag parameters were added in ExtremeXOS 11.0.