Configures the maximum allowed IP ARP entries.
vr_name | Specifies a VR name. |
max_entries | Specifies the maximum number of IP ARP entries. The range is 1 to x, where x is the number listed for the appropriate platform in table below. |
8192 for the Default VR and all user-created VRs.
4096 for the VR-Mgmt VR.
If you do not specify a VR or VRF, the current VR context is used.
Note
The default value for the Default and user-created VRs changed from 4,096 to 8,192 in ExtremeXOS release12.2.
The maximum IP ARP entries include dynamic, static, and incomplete IP ARP entries. The range for the max_entries parameter is 1 to x, where x is the number listed for the appropriate platform in the following table.
Distributed IP ARP Feature Configuration | ||
---|---|---|
Maximum Entries | Off (Default) | On |
20480 | N/A. | N/A |
The switch hardware supports only the maximum number of entries listed in the table above.. If the hardware limit is reached, the switch displays a message and can no longer store additional ARP entries.
The following example sets the maximum IP ARP entries to 2000 entries:
configure iparp max_entries 2000
This command was first available in ExtremeXOS 10.1.
Support for up to 32,768 ARP entries was first available in ExtremeXOS 12.4.