Displays multicast cache information. The display can be limited to entries for specific VLAN (Virtual LAN)s or groups, and it can be limited to specific types of entries, such as those created by snooping protocols, or PIM.
name | Specifies a VLAN name. |
v6GrpAddressMask | Specifies a multicast group address and mask. |
v6SourceIP | Specifies the source IP address for a multicast group. |
snooping | Limits the display to cache entries created by MLD snooping. |
pim | Limits the display to cache entries created by PIM. |
summary | Specifies the summary display format. |
Displays information for all entries in the multicast cache.
None.
The following command displays all multicast cache information:
# show mcast ipv6 cache Snooping Cache Timeout: 300 sec (ff03::1 3001::1) Type: snoop Age: 9 Ingress Vlan: v1 Vlan Port Vid v1 25 4084 (ff03::1 3001::2) Type: snoop Age: 9 Ingress Vlan: v1 Vlan Port Vid v1 25 4084 Multicast cache distribution: 2 entries from Snooping 0 entries from PIM Total Cache Entries: 2
The following command displays summary cache information for VLAN v1:
# show mcast ipv6 cache vlan v1 summary Snooping Cache Timeout: 300 sec ==============MULTICAST CACHE SUMMARY============== Multicast cache distribution: 2 entries from Snooping 0 entries from PIM v1: Multicast cache distribution: 2 entries from Snooping 0 entries from PIM Total Cache Entries: 2 Total Cache Entries for VLAN v1: 2 #
This command was first available in ExtremeXOS 15.2.
This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the MLD snooping feature, see the ExtremeXOS 22.6 Feature License Requirements document.