Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

enable snmp traps lldp

enable snmp traps lldp {ports [all | port_list]}

Description

Enables the transmission of LLDP (Link Layer Discovery Protocol) SNMP (Simple Network Management Protocol) trap notifications.

Syntax Description

all Specifies all ports on the switch.
port_list Specifies one or more ports or slots and ports.

Default

Disabled.

Usage Guidelines

Note

Note

To enable SNMP traps for LLDP MED TLVs, you must issue a separate command; use the enable snmp traps lldp-med {ports [all | port_list]} .

If you do not specify any ports, the system sends LLDP traps for all ports.

Note

Note

The Avaya-Extreme proprietary TLVs do not send traps.

Example

The following command enables LLDP SNMP traps for all ports:

enable snmp traps lldp ports all

History

This command was first available in ExtremeXOS 11.2.

Platform Availability

Published September 2018prev | next

Email this topicEmail this topic

Print this pagePrint this page