Enables and disables the new-root trap.
| stpd_name | Specifies an STPD (Spanning Tree Domain) name on the switch. |
| on | Enables the new-root trap. |
| off | Disables the new-root trap. |
By default, the trap is enabled (on).
The new-root trap is sent when the new root bridge is elected.
The following example disables the new-root trap for the STP (Spanning Tree Protocol) domain r1.
configure stpd r1 trap new-root off
This command was first available in ExtremeXOS 15.7.1.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB