configure ripng add

configure ripng add [vlan vlan-name | tunnel tunnel-name | [vlan | tunnel] all]

Description

Configures RIPng (Routing Information Protocol Next Generation) on an IP interface.

Syntax Description

vlan-name Specifies an IPv6 configured VLAN (Virtual LAN).
tunnel-name Specifies an IPv6 tunnel.
all Specifies all IPv6 configured VLANs or tunnels.

Default

N/A.

Usage Guidelines

For RIPng to be active on the interface, it must also be globally enabled using the command disable ripng export [direct | ospfv3 | ospfv3-extern1 | ospfv3-extern2 | ospfv3-inter | ospfv3-intra | static | isis | isis-level-1| isis-level-1-external | isis-level-2| isis-level-2-external | bgp]. If the keyword all is specified, all IPv6 configured VLANs or tunnels will be configured for RIPng.

Example

The following command configures RIPng on the VLAN finance:
configure ripng add finance

History

This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on platforms with an Edge, Advanced Edge, or Core license. For licensing information, see the ExtremeXOS 22.6 Feature License Requirements document.