Displays the specified access list counters.
countername | Specifies the ACL (Access Control List) counter to display. |
port_list | Specifies to display the counters on these ports. |
vlan_name | Specifies to display the counters on the VLAN (Virtual LAN). |
ingress | Specifies to display ingress counters. |
egress | Specifies to display egress counters. |
The default direction is ingress.
Use this command to display the ACL counters.
The following example displays all the counters for all ACLs:
show access-list counter
This command was first available in ExtremeXOS 10.1.
The egress option was first available in ExtremeXOS 11.3.